Axion Security

Fire Alarm or Sprinkler System Down in Prince George? What to Do in the First 24 Hours 

A fire alarm panel shows a fault at 9 p.m. in January. A sprinkler line freezes in an unheated stairwell. Either way, the building has just lost its early warning, and the next few hours decide whether it stays safe and compliant. This guide walks Prince George building owners and property managers through the first 24 hours, from the first call to the moment the system is restored. 

Axion Security

For a full overview of fire watch, see fire watch services in Prince George

Why Systems Go Down in a Prince George Winter    

  • Sprinkler lines in unheated or poorly heated areas can freeze and burst
  • Heating systems, extension cords and older wiring work harder, raising fire risk at the same time
  • Renovation and repair work moves indoors and often requires systems to be switched off
  • Alarm panels can fault after power interruptions or water damage 

Hour 0 to 1: Make People Safe and Get the Facts

If there is any sign of fire or smoke, call 911 first. Otherwise, call your fire protection technician and find out exactly what is impaired: which system, which floors or areas, and how long the repair is likely to take. Tell occupants what is happening and how they will be alerted if there is a fire. Leave diagnosis and repair to a qualified fire protection technician; in BC, that is usually an ASTTBC-registered technician.

Hours 1 to 4: Notify the Right People 

The BC Fire Code’s explanatory notes say interruptions to fire protection systems should be communicated, preferably in advance, to parties that can include the fire department, building supervisory staff and occupants. Make sure these people know:

  • The fire department. For Prince George buildings, contact Prince George Fire Rescue. The City’s non-emergency line is 250-561-7600 or 311, listed on the City of Prince George public safety page
  • Your alarm monitoring company, so they know signals from the building may be affected.
  • Your insurer or broker. Policies can include conditions tied to fire protection systems, so report the outage promptly and keep records.

Practice varies by city. In Vancouver, for example, the fire department should be notified when a system is out of service for more than 4 continuous hours in a 24 hour period. In Chilliwack the technician notifies the fire department, which may require a fire watch.

Hours 1 to 4: Put a Fire Watch in Place   

Under the BC Fire Code, a shutdown requires alternative measures that keep the building at the level of safety it was designed for. The Code’s notes list extra fire watch service as one option when sprinklers are out of service, worked out with the fire department. 

A fire watch means trained people patrol every affected area on a schedule, look for hazards and raise the alarm if a fire starts. Vancouver’s fire watch requirements give a sense of the pace: patrols every 30 minutes during business hours in non-residential buildings, and every 15 minutes overnight where people sleep.

Axion Security provides fire watch in Prince George with 24/7 emergency coverage and a standard response time of 30 minutes from your call. Patrols are logged digitally, and you receive a copy of the fire watch logs to share with the fire department and your insurer.

Hours 4 to 24: Protect the Building While You Wait

  • Keep exits and fire doors clear, and do not prop fire doors open 
  • Pause hot work and limit other ignition sources until the system is back 
  • Check that portable extinguishers are in place and charged
  • Keep heat on in areas with water lines to prevent further freezing 
  • Photograph damage and keep a timeline of calls, visits and decisions for your insurer

Who Does What   

  • Owner or manager: makes decisions, stays the fire department’s point of contact and keeps records.Fire protection technician: diagnoses, repairs and confirms when the system is restored.
  • Fire department: sets what is required while the system is down and when it can end.
  • Fire watch provider: patrols, watches for fire, raises the alarm and logs every round.

Downtown Prince George has seen several serious fires in recent years, covered in Axion’s post on arson prevention and downtown security which is one more reason not to leave a building unprotected overnight. If the building is also empty, extra precautions apply.

Need a Fire Watch Tonight?    

Call Axion Security toll free at 1-888-313-4466 or request a quote. Have the building address, the system that is down and the technician’s expected repair date ready.

Frequently Asked Questions  

1. Do I need a fire watch if my sprinkler system is frozen?   
Often, yes. The BC Fire Code expects alternative safety measures during a shutdown, and the fire department decides what is required for your building. Contact Prince George Fire Rescue as soon as the system is out.
 
2. Who do I call first when my fire alarm stops working?       
If there is any sign of fire, call 911. Otherwise, call your fire protection technician, then notify the fire department, your alarm monitoring company and your insurer. 
 
3. Can I repair or reset the fire alarm panel myself? 
Leave diagnosis and repair to a qualified fire protection technician. Resetting a panel without finding the cause can leave the building unprotected without anyone realizing it.
 
4. How fast can a fire watch start in Prince George?     
Axion Security’s standard response time is 30 minutes from your call, with 24/7 emergency coverage. Call 1-888-313-4466 as soon as the system goes down. 
 
5. Does my insurer need to know about the outage?    
Tell your broker or insurer promptly. Policies can include conditions tied to fire protection systems, and fire watch logs help show the building was protected.